5935-00-593-9919, INSERT,ELECTRICAL CONNECTOR

National Stock Number:
5935-00-593-9919

Federal Supply Class:
5935

National Item Identification Number:
005939919

Description:
INSERT,ELECTRICAL CONNECTOR

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

14-20SH	95238	WINCHESTER INTERCONNECT CORPORATION
7411470P2	99971	LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS
M28748/5-C00G1A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M28748/5C00G1A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-28748/5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC28748-5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MRE14SG7H	81312	WINCHESTER INTERCONNECT CORPORATION
MRE14SGH	81312	WINCHESTER INTERCONNECT CORPORATION

Techincal Specification:

MATING END QUANTITY	1
CONTACT POSITION ARRANGEMENT STYLE	14 SINGLE MATING END
OVERALL LENGTH	1.235 INCHES MINIMUM AND
	1.275 INCHES MAXIMUM
OVERALL HEIGHT	0.850 INCHES NOMINAL
OVERALL WIDTH	0.418 INCHES MINIMUM AND
	0.458 INCHES MAXIMUM
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	0.936 INCHES MINIMUM AND
	0.946 INCHES MAXIMUM
THREADED DEVICE TYPE	MOUNTING STUD
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.112 INCHES
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
POLARIZATION METHOD	GUIDE PIN/SOCKET
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14,TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-P-19833,TY GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
INCLUDED CONTACT QUANTITY	14 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	7.5 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	SHOCK RESISTANT AND
	VIBRATION RESISTANT
TEST DATA DOCUMENT	81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.014 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
SPECIFICATION/STANDARD DATA	81349-MIL-C-28748/5 GOVERNMENT SPECIFICATION
SPEC/STD CONTROLLING DATA
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-DTL-28748/5
MANUFACTURERS CODE	81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M28748/5-C00G1A

Click here to Register for Free 30-day Trial