|
|
|
National Stock Number:
5935-00-594-0199
Federal Supply Class:
5935
National Item Identification Number:
005940199
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| MIL-C-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24132-1S | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24132S1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CABLE OPENING DIAMETER | 0.070 INCHES MINIMUM | | CABLE OPENING LENGTH | 0.620 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.906 INCHES MINIMUM AND 0.911 INCHES MAXIMUM | | OVERALL HEIGHT | 0.908 INCHES MINIMUM AND 1.423 INCHES MAXIMUM | | OVERALL LENGTH | 2.043 INCHES MAXIMUM | | OVERALL WIDTH | 0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | NOMINAL THREAD SIZE | 0.112 INCHES | | SIZE DESIGNATION | 7 | | SPECIFICATION/STANDARD DATA | 96906-MS24132 GOVERNMENT STANDARD | | STYLE DESIGNATOR | HOOD, SIDE OPENING W/CLAMP | | SURFACE TREATMENT | ANODIZE | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNC | | UNTHREADED MOUNTING HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
|
|