|
|
National Stock Number: 5935-00-604-8464
Federal Supply Class: 5935
National Item Identification Number: 006048464
Description: CONNECTOR,RECEPTACLE,ELECTRICAL
Detail: An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
10-36972-51P | 77820 | AMPHENOL CORP | 155415 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | INCLUDED CONTACT QUANTITY | 3 SINGLE MATING END SINGLE CONTACT GROUPING | MATING END QUANTITY | 1 | OVERALL LENGTH | 1.875 INCHES NOMINAL | OVERALL HEIGHT | 1.250 INCHES NOMINAL | OVERALL WIDTH | 1.250 INCHES NOMINAL | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.969 INCHES NOMINAL | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.969 INCHES NOMINAL | UNTHREADED MOUNTING HOLE DIAMETER | 0.150 INCHES NOMINAL | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | THREADED DEVICE TYPE | COUPLING FACILITY | THREAD SERIES DESIGNATOR | UNEF | NOMINAL THREAD SIZE | 1.000 INCHES | THREAD QUANTITY PER INCH | 20 | THREAD DIRECTION | RIGHT-HAND | SHELL TYPE | SOLID | SHELL MATERIAL | ALUMINUM ALLOY | SHELL SURFACE TREATMENT | ANODIZE | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | INSERT POSITION IN DEG | 0.0 | INSERT MATERIAL | RUBBER SINGLE MATING END | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 SINGLE MATING END SINGLE CONTACT GROUPING | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT | THE MANUFACTURERS DATA | | MANUFACTURERS CODE | 77820 | DESIGN CONTROL REFERENCE | 10-36972-51P |
|
|