| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 200.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | "14S-6,11-6" SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| INCLUDED CONTACT QUANTITY | 6 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | RUBBER SILICONE CLASS Q SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.290 INCHES AND 0.414 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 200.0 CELSIUS MAXIMUM |
| OVERALL DIAMETER | 1.156 INCHES MAXIMUM |
| OVERALL LENGTH | 2.031 INCHES MAXIMUM |
| POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.006 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | IN ORDER TO COMPLETE THE CONNECTOR ASSEMBLY,THE USER MUST OBTAIN/PROVIDE THE BACKSHELL; STANDARD VERSIONS MAY BE ORDERED AS NSN 5935-01-163-3224,P/N M85049/52-1-14W FOR THE STRAIGHT STYLE,OR NSN 5935-01-186-5612,P/N M85049/51-1-14W FOR THE RIGHT ANGLE STYLE |
| SPECIFICATION/STANDARD DATA | 96906-MS3456 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF |