| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.537 INCHES NOMINAL |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | SCREW |
| CONTACT POSITION ARRANGEMENT STYLE | 158 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 13.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 158 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC PHENOLIC SINGLE MATING END |
| OVERALL HEIGHT | 1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM |
| OVERALL LENGTH | 1.180 INCHES NOMINAL |
| OVERALL WIDTH | 2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.250 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| POLARIZATION METHOD | POLARIZATION BOSS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.158 GOLD GRAINS, TROY |
| SPECIAL FEATURES | POLARIZED AT POSITION Y |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-28748/9 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2B |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 28 |
| THREADED DEVICE TYPE | COUPLING FACILITY |