| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.310 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.766 INCHES MINIMUM AND 2.776 INCHES MAXIMUM |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT POSITION ARRANGEMENT STYLE | 59 SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 23.0 SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END 2ND CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 600.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | RHODIUM SINGLE MATING END ALL CONTACT GROUPINGS AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| DEPARTURE FROM CITED DOCUMENT | AIR LEAKAGE |
| ENVIRONMENTAL PROTECTION | PRESSURE PROOF |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 57 SINGLE MATING END 2ND CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MDG MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| NOMINAL THREAD LENGTH | 0.250 INCHES |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| OVERALL HEIGHT | 3.205 INCHES NOMINAL |
| OVERALL LENGTH | 1.331 INCHES NOMINAL |
| OVERALL WIDTH | 1.245 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM |
| POLARIZATION METHOD | MATING END |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES RHODIUM AND CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.059 RHODIUM GRAINS, TROY AND 0.059 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | RHODIUM AND SILVER |
| SPECIAL FEATURES | MAX. LEAKAGE 0.1CU IN/HR. AT 30PSI PD WHEN POTTED |
| TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | MOUNTING HOLE |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |