| BODY LENGTH | 2.073 INCHES MINIMUM AND 2.103 INCHES MAXIMUM |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 425.0 SINGLE MATING END 2ND CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 9W4 SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.852 INCHES NOMINAL |
| INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 5 SINGLE MATING END 2ND CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END 2ND CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| OVERALL HEIGHT | 0.743 INCHES MINIMUM AND 0.783 INCHES MAXIMUM |
| OVERALL WIDTH | 0.419 INCHES MINIMUM AND 0.449 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| POLARIZATION METHOD | MATING END |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.009 GOLD GRAINS, TROY AND 0.009 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END 1ST CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ5636 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | STEEL |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-8384 GOVERNMENT SPECIFICATION |
| SUPPLEMENTARY FEATURES | MOUNTING METHOD - FLOAT |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| TEST DATA DOCUMENT | 81349-MIL-C-8384 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM AND 0.089 INCHES MAXIMUM |