5935-00-817-3320 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-00-817-3331 JACK,TIP

National Stock Number:
5935-00-817-3325

Federal Supply Class:
5935

National Item Identification Number:
008173325

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
2LV4531.011D1901HENSOLDT SENSORS GMBH
30130 ITEM 5K8253THALES OPTRONICS
71C102E10SL3P06635BELL DAVID CO INC
808305018876U S ARMY AVIATION AND MISSILE COMMAND
410-5454A486GNIMIKKEISTOKESKUS NCB FINLAND
30130/5K8253THALES OPTRONICS
B871321REV056232LOCKHEED MARTIN CORPORATION
AN3102E10SL3P71468ITT CANNON LLC
CP3102E-10SL-3P77820AMPHENOL CORP
AN3102E10SL3P88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
MS3102E10SL3P96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
98053497907TEREX CORP
FV1052026 ITEM 5K0407BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
FV1052026/5K0407BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
MS3102P10SL3P19899ELECTRIC MACHINERY DRESSER INDUSTRIES INC
MS3102P10SL3P60451CEGELEC AUTOMATION INC DIV OF GENERAL ELECTRIC CO PLC OF ENGLAND
MS3102P10SL3P71468ITT CANNON LLC
S2255880072H20 TANK INC U S MOTORS DIV


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPEROUND
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT POSITION ARRANGEMENT STYLE10SL-3 SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTSILVER SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY3 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG0.0
OVERALL HEIGHT0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
OVERALL LENGTH1.188 INCHES MAXIMUM
OVERALL WIDTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
MATING END QUANTITY1
NOMINAL THREAD SIZE0.625 INCHES
NOMINAL THREAD LENGTH0.375 INCHES
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES SILVER
PRECIOUS MATERIALSILVER
PRECIOUS MATERIAL AND WEIGHT0.015 SILVER GRAINS, TROY
SHELL MATERIALALUMINUM
SHELL SURFACE TREATMENTCADMIUM
SHELL TYPESOLID
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A
THREAD SERIES DESIGNATORUNEF
THREAD QUANTITY PER INCH24
THREADED DEVICE TYPECOUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us