| BODY STYLE | RECTANGULAR SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.974 INCHES MINIMUM AND 2.994 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET |
| CONTACT POSITION ARRANGEMENT STYLE | 66 SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 13.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SHOCK RESISTANT AND PRESSURE PROOF |
| INCLUDED CONTACT QUANTITY | 66 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| OVERALL HEIGHT | 1.250 INCHES MAXIMUM |
| OVERALL LENGTH | 3.281 INCHES MINIMUM AND 3.313 INCHES MAXIMUM |
| OVERALL WIDTH | 1.672 INCHES MINIMUM AND 1.704 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 135.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | JACKSCREW AND SHELL |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.066 GOLD GRAINS, TROY AND 0.066 SILVER GRAINS, TROY |
| SHELL GUIDE TYPE AND LOCATION DESIGNATOR | A SLOT |
| SHELL MATERIAL | STEEL CORROSION RESISTING |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | JACKSCREW TYPE-FEMALE AND LOCATION-RIGHT HANDANDJACKSCREW TYPE-MALE AND LOCATION-LEFT HAND |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A AND 2B |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |