|
|
|
National Stock Number:
5935-00-843-4117
Federal Supply Class:
5935
National Item Identification Number:
008434117
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
THE OUTSIDE CASE OF A CONNECTOR INTO WHICH THE DIELECTRIC MATERIALS AND CONTACTS ARE ASSEMBLED. ALSO INCLUDES SHELL FOR ADAPTER, CONNECTOR. SEE ALSO SHIELD, ELECTRICAL CONNECTOR AND COVER, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| AS50151 | 0U583 | SAE INTERNATIONAL | | AS50151 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MILC5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3105-16 | 04939 | LOCKHEED MARTIN CORPORATION | | MS3105-16 | 0U583 | SAE INTERNATIONAL | | MS3105-16 | 38597 | LOCKHEED MARTIN CORPORATION | | MS3105-16 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3105-16 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.969 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.969 INCHES NOMINAL | | OVERALL HEIGHT | 1.250 INCHES MINIMUM AND 1.312 INCHES MAXIMUM | | OVERALL LENGTH | 0.828 INCHES MINIMUM AND 0.937 INCHES MAXIMUM | | OVERALL WIDTH | 1.250 INCHES MINIMUM AND 1.312 INCHES MAXIMUM | | NOMINAL THREAD SIZE | 1.000 INCHES | | NOMINAL THREAD LENGTH | 0.625 INCHES | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SPECIFICATION/STANDARD DATA | 81349-MILC5015 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MILC5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | UNEF | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
|
|