|
|
|
National Stock Number:
5935-00-929-0474
Federal Supply Class:
5935
National Item Identification Number:
009290474
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 16-00657-001 | 00724 | RAYTHEON COMPANY | | 50-012-0000 | 98291 | ITT CANNON RF PRODUCTS |
|
Techincal Specification:
| BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | C SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 0.703 INCHES NOMINAL | | OVERALL HEIGHT | 0.750 INCHES NOMINAL | | OVERALL DIAMETER | 0.250 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.425 INCHES NOMINAL | | MOUNTING FACILITY THICKNESS | 0.093 INCHES NOMINAL | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | BACK SHELL AND | | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.090 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 32 | | THREAD DIRECTION | RIGHT-HAND | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | GOLD | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 1.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 400.0 SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-C-22557 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | SHELL AND CONTACT SURFACES GOLD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98291 | | DESIGN CONTROL REFERENCE | 50-012-0000 |
|
|