5935-00-936-7383, CONNECTOR,RECEPTACLE,ELECTRICAL

5905-00-936-7384 RESISTOR,FIXED,WIRE WOUND

National Stock Number:
5935-00-936-7383

Federal Supply Class:
5935

National Item Identification Number:
009367383

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

A51S21933-13	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
M39012-18-0001	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC39012-18	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
UG262DU	80058	JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.565 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE W/CABLE CLAMP
BUSHING DIAMETER	0.505 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.504 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD	COMPRESSION NUT
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	BNC SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.504 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
OVERALL HEIGHT	0.700 INCHES MAXIMUM
OVERALL LENGTH	1.250 INCHES MAXIMUM
OVERALL WIDTH	0.700 INCHES MAXIMUM
MATING END QUANTITY	1
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACE AND SHELL @SURFACE GOLD
PRECIOUS MATERIAL AND WEIGHT	0.105 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL	COPPER ALLOY
SHELL SURFACE TREATMENT	GOLD
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	81349-MIL-C-39012/18 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.147 INCHES NOMINAL

Click here to Register for Free 30-day Trial