|
|
|
National Stock Number:
5935-00-938-7377
Federal Supply Class:
5935
National Item Identification Number:
009387377
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M39012/23-0002 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-39012/23 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UG1174AU | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | UG1174AU | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC39012-23 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTOR LOCKING METHOD | BAYONET LATCH | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | INSERT POSITION IN DEG | 250.0 | | OVERALL HEIGHT | 0.585 INCHES NOMINAL | | OVERALL LENGTH | 1.250 INCHES NOMINAL | | OVERALL WIDTH | 0.781 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.375 INCHES | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER ALLOY | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349--39012/230002 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 32 | | THREADED DEVICE TYPE | MOUNTING HOLE |
|
|