5935-00-951-0528, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-951-0528

Federal Supply Class:
5935

National Item Identification Number:
009510528

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

MIL-C-26500E	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-26500	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS24265R14T7P	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS24265R14T7PN	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.761 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
BUSHING ACCOMMODATION HOLE SHAPE	ROUND W/FLAT
CABLE ENTRANCE DIAMETER	0.375 INCHES MINIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD	CABLE CLAMP
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	PRESSURE PROOF AND MOISTURE RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY	7 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	0.0
OVERALL DIAMETER	1.505 INCHES MAXIMUM
OVERALL LENGTH	1.625 INCHES MINIMUM AND 2.140 INCHES MAXIMUM
MATING END QUANTITY	1
NOMINAL THREAD SIZE	1.000 INCHES AND 0.938 INCHES
NOMINAL THREAD LENGTH	0.281 INCHES
POLARIZATION METHOD	KEY, MULTIPLE KEY GROOVE
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.007 GOLD GRAINS, TROY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	AMS4135 ASSN STD SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM
SHELL SURFACE TREATMENT	ANODIZE
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	96906-MS24265R14T7P GOVERNMENT STANDARD
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-26500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNEF
THREAD QUANTITY PER INCH	20
THREADED DEVICE TYPE	COUPLING FACILITY AND MOUNTING BUSHING

Click here to Register for Free 30-day Trial