|
|
|
National Stock Number:
5935-00-989-0884
Federal Supply Class:
5935
National Item Identification Number:
009890884
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 13 | 24930 | L3HARRIS TECHNOLOGIES, INC | | 2182-6 | 71468 | ITT CANNON LLC | | 97-181-18 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | MS3105-18 | 0U583 | SAE INTERNATIONAL | | CA2182-6 | 71468 | ITT CANNON LLC | | MIL-C-5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL | | NAS1196-9 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS3105-18 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.062 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.062 INCHES NOMINAL | | INCLUDED CONTACT QUANTITY | 0 SINGLE MATING END SINGLE CONTACT GROUPING | | OVERALL HEIGHT | 1.375 INCHES NOMINAL | | OVERALL LENGTH | 0.844 INCHES MINIMUM AND 0.984 INCHES MAXIMUM | | OVERALL WIDTH | 1.375 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.625 INCHES | | NOMINAL THREAD SIZE | 1.125 INCHES | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 96906-MS3105 GOVERNMENT STANDARD | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNEF | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
|
|