| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.835 INCHES MINIMUM AND 0.857 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP |
| BUSHING DIAMETER | 0.690 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.714 INCHES MINIMUM AND 0.722 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CRIMP TYPE |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MAXIMUM FREQUENCY RATING | 11000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | SC SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.714 INCHES MINIMUM AND 0.722 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SHOCK PROOF AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| OVERALL HEIGHT | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| OVERALL LENGTH | 1.843 INCHES MAXIMUM |
| OVERALL WIDTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.688 INCHES AND 0.138 INCHES |
| NOMINAL THREAD LENGTH | 0.250 INCHES AND 0.075 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39012/38 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A AND 2B |
| THREAD QUANTITY PER INCH | 24 AND 32 |
| THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING HOLE |
| THREAD SERIES DESIGNATOR | UNEF AND UNC |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL |