|
|
|
National Stock Number:
5935-01-042-1857
Federal Supply Class:
5935
National Item Identification Number:
010421857
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| AS81659/29 | 0U583 | SAE INTERNATIONAL | | AS81659/29 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M81659/29A20034 | 0U583 | SAE INTERNATIONAL | | DPXBMA-67-33S-0204 | 71468 | ITT CANNON LLC | | M81659/29A20034 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M81659/29A20034 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81659/29 | 0U583 | SAE INTERNATIONAL | | MILC81659-29 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.764 INCHES MINIMUM AND 0.768 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.720 INCHES NOMINAL | | CONTACT POSITION ARRANGEMENT STYLE | 67 SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.435 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | COLD RESISTANT AND SHOCK PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 64 SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT QUANTITY | 3 SINGLE MATING END 1ST CONTACT GROUPING | | INSERT MATERIAL | RUBBER SINGLE MATING END | | OVERALL HEIGHT | 2.032 INCHES MINIMUM AND 2.062 INCHES MAXIMUM | | OVERALL LENGTH | 1.541 INCHES MAXIMUM | | OVERALL WIDTH | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.067 GOLD GRAINS, TROY | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81659/29 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS | | TEST DATA DOCUMENT | 81349-MIL-C-81659 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|