| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MAXIMUM FREQUENCY RATING | 1000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | N SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| OVERALL HEIGHT | 0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.672 INCHES MAXIMUM |
| OVERALL WIDTH | 0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.625 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39012/2 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD SERIES DESIGNATOR | UNEF |
| THREAD QUANTITY PER INCH | 24 |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |