|
|
|
National Stock Number:
5935-01-078-4815
Federal Supply Class:
5935
National Item Identification Number:
010784815
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| M24308/20-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-24308/20 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CABLE OPENING LENGTH | 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM | | CABLE OPENING WIDTH | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.401 INCHES MINIMUM AND 2.411 INCHES MAXIMUM | | OVERALL HEIGHT | 1.688 INCHES MAXIMUM | | OVERALL LENGTH | 2.610 INCHES MINIMUM AND 2.640 INCHES MAXIMUM | | OVERALL WIDTH | 0.578 INCHES MINIMUM AND 0.623 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | SIZE DESIGNATION | 5 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-24308/20 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | HOOD TYPE W/STRAIGHT CLAMP AND FLANGE | | SURFACE TREATMENT | CHROMATE AND CADMIUM | | TEST DATA DOCUMENT | 81349-MIL-C-24308 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
|
|