|
|
|
National Stock Number:
5935-01-079-8986
Federal Supply Class:
5935
National Item Identification Number:
010798986
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M81511/05ED01P2 | 0U583 | SAE INTERNATIONAL | | M81511/05ED01P2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81511/5 | 0U583 | SAE INTERNATIONAL | | MIL-C-81511/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | 14-37 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 37 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.275 INCHES MINIMUM AND | | 1.340 INCHES MAXIMUM | | OVERALL DIAMETER | 0.928 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.555 INCHES MINIMUM AND | | 0.575 INCHES MAXIMUM | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | BAYONET PIN | | THREADED DEVICE TYPE | BACK SHELL | | THREAD SERIES DESIGNATOR | UN | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 28 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY 6061 | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 T-6 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | INSERT POSITION IN DEG | 46.0 | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 TYPE 1 OR 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | SHOCK PROOF AND | | VIBRATION PROOF | | TEST DATA DOCUMENT | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.037 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIAL FEATURES | SOLDER FLANGE MTG | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81511/5 GOVERNMENT SPECIFICATION |
|
|