| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.615 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.558 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | SCREW |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT POSITION ARRANGEMENT STYLE | 71C15 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 3.871 INCHES MINIMUM AND 3.879 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 15 SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 56 SINGLE MATING END 2ND CONTACT GROUPING |
| OVERALL HEIGHT | 1.170 INCHES MAXIMUM |
| OVERALL LENGTH | 1.880 INCHES MAXIMUM |
| OVERALL WIDTH | 4.325 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| POLARIZATION METHOD | MATING END |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.071 GOLD GRAINS, TROY AND 0.071 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | NICKEL |
| SHELL TYPE | SOLID |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 GRADE B,CLASS 3 OR 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-83733/5 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| TEST DATA DOCUMENT | 81349-MIL-C-83733 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | MOUNTING STUD |