5935-01-083-1216 CONNECTOR,PLUG,ELECTRICAL Index 5935-01-083-1218 ADAPTER,CONNECTOR

National Stock Number:
5935-01-083-1217

Federal Supply Class:
5935

National Item Identification Number:
010831217

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
34N-50-0-1S4773HUBER + SUHNER AG
KN-99-3491836WINCHESTER INTERCONNECT CORPORATION
M55339/04-0000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M55339/04-000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-55339/481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-55339/481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.858 INCHES MINIMUM AND 0.868 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPEROUND W/DOUBLE FLAT
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLEN ALL MATING ENDS
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 1,CL 2,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPECOAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 2ND MATING END SINGLE CONTACT GROUPING
OVERALL DIAMETER0.900 INCHES MAXIMUM
OVERALL LENGTH1.562 INCHES MAXIMUM
MATING END QUANTITY2
NOMINAL THREAD SIZE0.625 INCHES
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
PRECIOUS MATERIALGOLD
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
SHELL MATERIALCOPPER ALLOY
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-C-55339/4 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-C-55339 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNEF
THREADED DEVICE TYPECOUPLING FACILITY AND MOUNTING BUSHING


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us