|
|
|
National Stock Number:
5935-01-125-2426
Federal Supply Class:
5935
National Item Identification Number:
011252426
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| PVS-15G12 | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.493 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SALT WATER RESISTANT | | INSERT POSITION IN DEG | 0.0 | | MATING END QUANTITY | 1 | | OVERALL HEIGHT | 1.047 INCHES NOMINAL | | OVERALL LENGTH | 0.571 INCHES MAXIMUM | | OVERALL WIDTH | 1.047 INCHES MAXIMUM | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | NICKEL OR CADMIUM OR ANODIZE | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |
|
|