|
|
|
National Stock Number:
5935-01-127-1897
Federal Supply Class:
5935
National Item Identification Number:
011271897
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10131654 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | M55302/4-06 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-55302 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-55302/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTOR LOCKING METHOD | FRICTION | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | | | ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT | | OVERALL HEIGHT | 0.426 INCHES MINIMUM AND 0.454 INCHES MAXIMUM | | OVERALL LENGTH | 4.150 INCHES NOMINAL | | OVERALL WIDTH | 0.328 INCHES MINIMUM AND 0.357 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | GUIDE PIN/SOCKET | | PRECIOUS MATERIAL AND LOCATION | CONTACT AND GUIDE PIN SURFACES GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.077 GOLD GRAINS, TROY | | SPECIAL FEATURES | BODY STYLE: RIGHT ANGLE TYPE; DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 4.000 IN. NOM.; UNTHREADED MOUNTING HOLE DIAMETER: 0.079 IN. MIN. AND 0.084 IN. MAX. | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-55302/4 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-55302 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|