| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.782 INCHES NOMINAL |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.885 INCHES MINIMUM AND 0.897 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.436 INCHES NOMINAL |
| CONTACT MATERIAL | COPPER ALLOY 1ST MATING END 2ND CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY 2ND MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE 1ST MATING END 2ND CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE 2ND MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | "106,A106" 2ND MATING END |
| CONTACT SURFACE TREATMENT | SILVER 2ND MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | SILVER 1ST MATING END 2ND CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE 1ST MATING END 2ND CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE 2ND MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT AND HUMIDITY RESISTANT |
| GUIDE DESIGN AND LOCATION | D SHAPE SOCKET LEFT-HAND AT 6 OCLOCK AND D SHAPE SOCKET CENTER AT 6 OCLOCK |
| GUIDE DESIGN AND LOCATION | D SHAPE SOCKET RIGHT-HAND AT 12 OCLOCK |
| INSERT MATERIAL | RUBBER ALL MATING ENDS |
| MATING END QUANTITY | 2 |
| III BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| INCLUDED CONTACT QUANTITY | 7 1ST MATING END 2ND CONTACT GROUPING |
| POLARIZATION METHOD | 3 POLARIZATION POSTS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.135 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | SILVER |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL HEIGHT | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| OVERALL LENGTH | 1.800 INCHES MAXIMUM |
| OVERALL WIDTH | 3.095 INCHES MINIMUM AND 3.125 INCHES MAXIMUM |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | NICKEL |
| SHELL TYPE | SOLID |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE |
| TERMINAL LOCATION | BACK 1ST MATING END 2ND CONTACT GROUPING |
| TERMINAL LOCATION | BACK 2ND MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP 1ST MATING END 2ND CONTACT GROUPING |
| TERMINAL TYPE | CRIMP 2ND MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |