|
|
|
National Stock Number:
5935-01-144-0450
Federal Supply Class:
5935
National Item Identification Number:
011440450
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MIL-C-5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3100F40-56PW | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UN | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | UNTHREADED MOUNTING HOLE DIAMETER | 0.175 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | SHELL SURFACE TREATMENT | CADMIUM | | INSERT MATERIAL | RUBBER CHLOROPRENE CLASS CR SINGLE MATING END | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.875 INCHES NOMINAL | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.188 INCHES NOMINAL | | THREAD CLASS | 2B | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED COUPLING RING | | CONTACT POSITION ARRANGEMENT STYLE | 40-56 SINGLE MATING END | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | OVERALL WIDTH | 2.750 INCHES NOMINAL | | THREADED DEVICE TYPE | COUPLING FACILITY | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.188 INCHES NOMINAL | | SHELL MATERIAL | ALUMINUM | | NOMINAL THREAD SIZE | 2.500 INCHES | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF | | INSERT POSITION IN DEG | 72.0 | | OVERALL HEIGHT | 2.750 INCHES NOMINAL | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | CABLE ENTRANCE DIAMETER | 1.562 INCHES NOMINAL | | OVERALL LENGTH | 3.500 INCHES NOMINAL |
|
|