| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.519 INCHES MINIMUM AND 0.534 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.558 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 112-175 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 3.870 INCHES MINIMUM AND 3.880 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | SALT SPRAY PROOF AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT AND SOLVENT RESISTANT AND FUEL RESISTANT |
| GUIDE DESIGN AND LOCATION | D SHAPE PIN LEFT-HAND TOP AND D SHAPE PIN RIGHT-HAND BOTTOM AT 6 OCLOCK |
| INCLUDED CONTACT QUANTITY | 185 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC AND GLASS SINGLE MATING END |
| OVERALL HEIGHT | 1.146 INCHES MINIMUM AND 1.170 INCHES MAXIMUM |
| OVERALL LENGTH | 1.385 INCHES MAXIMUM |
| OVERALL WIDTH | 4.300 INCHES MINIMUM AND 4.330 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| POLARIZATION METHOD | MATING END AND GUIDE PIN/SOCKET |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.185 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY 380.0 |
| SHELL SURFACE TREATMENT | NICKEL |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |