| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.885 INCHES MINIMUM AND 0.897 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.438 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | JACKSCREW |
| CONTACT POSITION ARRANGEMENT STYLE | "106,A106" 1ST MATING END |
| CONTACT POSITION ARRANGEMENT STYLE | 67 2ND MATING END |
| CONTACT REMOVABILITY | REMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | SILVER ALL MATING ENDS ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND SALT WATER RESISTANT |
| INSERT MATERIAL | RUBBER ALL MATING ENDS |
| OVERALL HEIGHT | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| OVERALL LENGTH | 1.595 INCHES MAXIMUM |
| OVERALL WIDTH | 2.500 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.185 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | SILVER |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK ALL MATING ENDS ALL CONTACT GROUPINGS |
| TERMINAL TYPE | CRIMP ALL MATING ENDS ALL CONTACT GROUPINGS |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.122 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |