5945-01-160-1783 RELAY Index 5935-01-160-1785 CONNECTOR BODY,RECEPTACLE,ELECTR

National Stock Number:
5935-01-160-1784

Federal Supply Class:
5935

National Item Identification Number:
011601784

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
MIL-C-2648281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-2648281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3119E12-10Y96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY STYLESTRAIGHT SHAPE W/FLANGE
OVERALL LENGTH1.125 INCHES MAXIMUM
OVERALL HEIGHT1.047 INCHES MAXIMUM
OVERALL WIDTH1.047 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.812 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.812 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.562 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER0.120 INCHES NOMINAL
CONNECTOR LOCKING METHODBAYONET PIN
SHELL TYPESOLID
SHELL MATERIALALUMINUM ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENTCADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG270.0
MATING END QUANTITY2
CONTACT POSITION ARRANGEMENT STYLE12-10 ALL MATING ENDS
INCLUDED CONTACT QUANTITY10 1ST MATING END SINGLE CONTACT GROUPING
10 2ND MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN 1ST MATING END SINGLE CONTACT GROUPING
ROUND SOCKET 2ND MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD AND
NICKEL ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 TY 1,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND
QQ-N-290 GRADE E FED SPEC 2ND TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE PROOF AND
SALT WATER RESISTANT AND
VIBRATION PROOF
TEST DATA DOCUMENT81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA96906-MS3119 GOVERNMENT STANDARD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.020 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-DTL-26482
MANUFACTURERS CODE96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMS3119E12-10Y


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us