| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.719 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.783 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 13.0 ALL MATING ENDS 1ST CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 67 ALL MATING ENDS |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 ALL MATING ENDS 2ND CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS ALL CONTACT GROUPINGS AND NICKEL ALL MATING ENDS ALL CONTACT GROUPINGS |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| GUIDE DESIGN AND LOCATION | D SHAPE SOCKET LEFT-HAND AT 6 OCLOCK AND D SHAPE SOCKET CENTER AT 6 OCLOCK AND D SHAPE SOCKET RIGHT-HAND AT 6 OCLOCK |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-24325 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| INSERT MATERIAL | PLASTIC EPOXY ALL MATING ENDS |
| MATING END QUANTITY | 2 |
| III BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| INCLUDED CONTACT TYPE | ROUND PIN ALL MATING ENDS ALL CONTACT GROUPINGS |
| POLARIZATION METHOD | MATING END AND 3 POLARIZATION POSTS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.067 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL HEIGHT | 3.075 INCHES NOMINAL |
| OVERALL LENGTH | 1.521 INCHES MAXIMUM |
| OVERALL WIDTH | 2.000 INCHES NOMINAL |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | HAS FLOATING BUSHINGS IN FOUR PLACES |
| TERMINAL LOCATION | BACK ALL MATING ENDS ALL CONTACT GROUPINGS |
| TERMINAL TYPE | PIN ALL MATING ENDS 2ND CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL ALL MATING ENDS 1ST CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |