|
|
|
National Stock Number:
5935-01-169-0154
Federal Supply Class:
5935
National Item Identification Number:
011690154
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 30-8016-98-22-03 | 91662 | AVX CORPORATION | | M28731/19-0004 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-28731/19 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28731/19 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| STYLE DESIGNATOR | HOOD, TOP OPENING W/CLAMP | | MATERIAL | STEEL CORROSION RESISTING | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | OVERALL LENGTH | 2.025 INCHES MAXIMUM | | OVERALL WIDTH | 0.920 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING LENGTH | 0.650 INCHES NOMINAL | | CABLE OPENING WIDTH | 0.500 INCHES NOMINAL | | SEAL TYPE | GROMMET | | SEAL MATERIAL | RUBBER | | TEST DATA DOCUMENT | 81349-MIL-C-28731 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL FEATURES | 4 SCREWS ARE SUPPLIED FOR MOUNTING SHIELD TO INSULATOR | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28731/19 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-28731/19 | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M28731/19-0004 |
|
|