|
|
|
National Stock Number:
5935-01-177-1322
Federal Supply Class:
5935
National Item Identification Number:
011771322
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| M85049/3716W06D | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85049/3716W06D ZZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/37 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 90.0 | | CABLE OPENING DIAMETER | 0.562 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | DISTANCE FROM CENTERLINE TO CABLE END | 2.810 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 1.119 INCHES NOMINAL | | OVERALL WIDTH | 1.375 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD SIZE | 0.938 INCHES | | NOMINAL THREAD LENGTH | 0.190 INCHES | | SPECIAL FEATURES | 3 DRAIN HOLES | | SIZE DESIGNATION | 16 AND 17 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/37 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | ANGLE TYPE W/CLAMP | | SURFACE TREATMENT | CADMIUM | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 20 |
|
|