|
|
|
National Stock Number:
5935-01-179-4833
Federal Supply Class:
5935
National Item Identification Number:
011794833
Description:
CLAMP,CABLE,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| AS85049/51 | 0U583 | SAE INTERNATIONAL | | AS85049/51 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/51-1-16A | 0U583 | SAE INTERNATIONAL | | M85049/51-1-16A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/51-1-16A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/51 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/51 | 0U583 | SAE INTERNATIONAL | | SAE 85049/51 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3418-16C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 90.0 | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.501 INCHES MINIMUM AND 0.626 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 1.587 INCHES NOMINAL | | DISTANCE FROM CENTERLINE TO CABLE END | 1.697 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY LOCATION NOT OTHERWISE SPECIFIED | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD SIZE | 1.125 INCHES | | OVERALL WIDTH | 1.299 INCHES NOMINAL | | SIZE DESIGNATION | 16 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/51 GOVERNMENT SPECIFICATION | | SURFACE TREATMENT | CADMIUM AND CHROMATE | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNEF |
|
|