|
|
|
National Stock Number:
5935-01-180-8230
Federal Supply Class:
5935
National Item Identification Number:
011808230
Description:
CLAMP,CABLE,ELECTRICAL CONNECTOR
Detail:
A clamp specifically designed to hold an electrical cable firmly in a connector. Must include provisions for attachment to an electrical connector. Excludes ADAPTER (1), CABLE TO CONNECTOR.
|
Manufacturer Information:
| 7909232-02 | 90536 | LOCKHEED MARTIN CORP | | AS85049/51 | 0U583 | SAE INTERNATIONAL | | M85049/51-1-14A | 0U583 | SAE INTERNATIONAL | | M85049/51-1-14A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS85049/51 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/51-1-14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/51 | 0U583 | SAE INTERNATIONAL | | M85049/51-1-14A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/51 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3418-14A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 90.0 | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.351 INCHES MINIMUM AND 0.476 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 1.436 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 0.868 INCHES MINIMUM AND 0.992 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY LOCATION NOT OTHERWISE SPECIFIED | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD LENGTH | 0.290 INCHES | | NOMINAL THREAD SIZE | 0.875 INCHES | | OVERALL WIDTH | 0.939 INCHES MINIMUM AND 1.029 INCHES MAXIMUM | | SIZE DESIGNATION | 14 AND 14S | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/51 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | CLAMP, ANGLE TIE STRAP TYPE | | SURFACE TREATMENT | CADMIUM AND CHROMATE | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNEF |
|
|