|
|
|
National Stock Number:
5935-01-181-1670
Federal Supply Class:
5935
National Item Identification Number:
011811670
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 10493238 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 811AD0309 | A0199 | FINMECCANICA SPA | | AS85049/11A | 0U583 | SAE INTERNATIONAL | | M85049/11-112W | 0U583 | SAE INTERNATIONAL | | AS85049/11A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 8811AD0309 | A0199 | FINMECCANICA SPA | | SAE-AS85049/11 | 0U583 | SAE INTERNATIONAL | | M85049/11-112W | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/11-112W | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3437B112C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS85049/11-112 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/11-112W | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/9-57W | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| STYLE DESIGNATOR | STRAIGHT TYPE W/CABLE CLAMP | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | OVERALL LENGTH | 3.252 INCHES NOMINAL | | OVERALL HEIGHT | 1.750 INCHES NOMINAL | | OVERALL WIDTH | 1.112 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 20 | | THREAD DIRECTION | RIGHT-HAND | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.250 INCHES MINIMUM AND | | 0.437 INCHES MAXIMUM | | SEAL TYPE | GROMMET AND | | PREFORMED PACKING | | SEAL MATERIAL | RUBBER, SILICONE BASE | | SIZE DESIGNATION | 16 AND | | 16S AND | | 19 | | TEST DATA DOCUMENT | 81343-AS85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81343-AS85049/11 GOVERNMENT SPECIFICATION |
|
|