5905-01-187-7479 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5935-01-187-7481 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-187-7480

Federal Supply Class:
5935

National Item Identification Number:
011877480

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
22959224805ESC TECHNOLOGIES INC
24A101-109922SOURIAU USA, INC.
6287259-153711NAVAL SEA SYSTEMS COMMAND
8160-160674MICROWAVE DEVICES INC
KA91-1491836WINCHESTER INTERCONNECT CORPORATION
4133-000695077SV MICROWAVE, INC.
M55339/36-0000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-55339/3681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-55339/3681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY STYLESTRAIGHT SHAPE, INTERNAL COUPLING
OVERALL LENGTH1.343 INCHES MAXIMUM
OVERALL DIAMETER0.650 INCHES MAXIMUM
CONNECTOR LOCKING METHODINTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNEF
NOMINAL THREAD SIZE0.438 INCHES
THREAD CLASS2B
THREAD QUANTITY PER INCH28
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALCOPPER ALLOY
MATING END QUANTITY2
CONTACT POSITION ARRANGEMENT STYLETNC ALL MATING ENDS
INCLUDED CONTACT QUANTITY1 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL PIN ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 ALL MATING ENDS SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING11000.0 MEGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 1,CLASS 2,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND
SALT WATER RESISTANT AND
SHOCK RESISTANT AND
THERMAL SHOCK RESISTANT AND
VIBRATION RESISTANT
TEST DATA DOCUMENT81349-MIL-C-55339 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-C-55339/36 GOVERNMENT SPECIFICATION
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-PRF-55339/36
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEM55339/36-00001


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us