| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.436 INCHES NOMINAL |
| CONTACT POSITION ARRANGEMENT STYLE | 67 ALL MATING ENDS |
| CONTACT REMOVABILITY | REMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.782 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN ALL MATING ENDS ALL CONTACT GROUPINGS |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE OR PLASTIC EPOXY OR PLASTIC PHENOLIC ALL MATING ENDS |
| OVERALL HEIGHT | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| OVERALL LENGTH | 1.634 INCHES MAXIMUM |
| OVERALL WIDTH | 3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.134 GOLD GRAINS, TROY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC ALL TREATMENT RESPONSES |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-81659/35 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK ALL MATING ENDS ALL CONTACT GROUPINGS |
| TERMINAL TYPE | CRIMP ALL MATING ENDS ALL CONTACT GROUPINGS |
| TEST DATA DOCUMENT | 81349-MIL-C-81659 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |