5935-01-198-1760 ADAPTER,CONNECTOR Index 5935-01-198-1762 ADAPTER,CONNECTOR

National Stock Number:
5935-01-198-1761

Federal Supply Class:
5935

National Item Identification Number:
011981761

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
TBF-28-20PS77820AMPHENOL CORP


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.975 INCHES MINIMUM AND 0.985 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.562 INCHES NOMINAL
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.562 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONMOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
INCLUDED CONTACT TYPEROUND PIN 1ST MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPEROUND SOCKET 2ND MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT QUANTITY10 1ST MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT QUANTITY10 2ND MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT QUANTITY4 1ST MATING END 1ST CONTACT GROUPING
INCLUDED CONTACT QUANTITY4 2ND MATING END 1ST CONTACT GROUPING
INSERT MATERIALRUBBER ALL MATING ENDS
INSERT POSITION IN DEG0.0
OVERALL HEIGHT2.000 INCHES NOMINAL
OVERALL LENGTH2.125 INCHES NOMINAL
OVERALL WIDTH2.000 INCHES NOMINAL
MATING END QUANTITY2
NOMINAL THREAD SIZE1.750 INCHES
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.060 GOLD GRAINS, TROY
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM AND CHROMATE
SHELL TYPESOLID
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A
THREAD SERIES DESIGNATORUNS
THREAD QUANTITY PER INCH18
THREADED DEVICE TYPECOUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.145 INCHES MINIMUM AND 0.151 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us