|
|
|
National Stock Number:
5935-01-209-2287
Federal Supply Class:
5935
National Item Identification Number:
012092287
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| M85049/17-24W09B | 0U583 | SAE INTERNATIONAL | | M85049/1724W09B | 0U583 | SAE INTERNATIONAL | | SAE-AS85049/17 | 0U583 | SAE INTERNATIONAL | | M85049/1724W09B | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/1724W09B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/17 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.438 INCHES | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 18 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.219 INCHES | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 1.000 INCHES MINIMUM AND | | 1.125 INCHES MAXIMUM | | SEAL TYPE | GROMMET | | SEAL MATERIAL | RUBBER, SILICONE BASE | | SIZE DESIGNATION | 25 | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/17 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | STRAIGHT TYPE W/CABLE CLAMP | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | OVERALL LENGTH | 5.125 INCHES MAXIMUM | | OVERALL HEIGHT | 1.750 INCHES MAXIMUM | | OVERALL WIDTH | 1.359 INCHES NOMINAL |
|
|