|
|
|
National Stock Number:
5935-01-224-6228
Federal Supply Class:
5935
National Item Identification Number:
012246228
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| AS85049/8 | 0U583 | SAE INTERNATIONAL | | AS85049/8 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/8-50W | 0U583 | SAE INTERNATIONAL | | M85049/8-50W | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/8-50W | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/8 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/8 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| STYLE DESIGNATOR | ANGLE TYPE W/CLAMP | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | OVERALL WIDTH | 1.531 INCHES NOMINAL | | BODY ANGLE IN DEG | 90.0 | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.610 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 4.186 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 20 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.290 INCHES | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.500 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | SEAL TYPE | GROMMET AND | | PREFORMED PACKING | | SEAL MATERIAL | RUBBER, SILICONE BASE | | SIZE DESIGNATION | 14 AND | | 14S | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/8 GOVERNMENT SPECIFICATION |
|
|