| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.783 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | FRICTION AND LATCH |
| CONTACT POSITION ARRANGEMENT STYLE | "106,A106" ALL MATING ENDS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| GUIDE DESIGN AND LOCATION | HEXAGON SHAPE MALE POST LEFT-HAND AND HEXAGON SHAPE MALE POST CENTER AND HEXAGON SHAPE MALE POST RIGHT-HAND AT 5 OCLOCK |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE OR 1288 BX MFR REF SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE OR PLASTIC EPOXY OR PLASTIC PHENOLIC ALL MATING ENDS |
| OVERALL HEIGHT | 3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM |
| OVERALL LENGTH | 2.026 INCHES MAXIMUM |
| OVERALL WIDTH | 1.966 INCHES MINIMUM AND 2.036 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| POLARIZATION METHOD | 3 POLARIZATION POSTS |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY OR ZINC |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND ZINC |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |