|
|
|
National Stock Number:
5935-01-230-2903
Federal Supply Class:
5935
National Item Identification Number:
012302903
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-150921-098 | 77820 | AMPHENOL CORP | | 10-553974-099 | 77820 | AMPHENOL CORP | | HS5098-0980 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 650HS010NF09 | 06324 | GLENAIR, INC. | | 5M2044-9 | 76301 | THE BOEING COMPANY | | HS5098-0980 | 8V613 | THE BOEING COMPANY | | POG103287 | K0216 | THALES OPTRONICS LIMITED |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.822 INCHES MINIMUM AND 0.842 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM | | OVERALL HEIGHT | 0.938 INCHES NOMINAL | | OVERALL LENGTH | 0.940 INCHES MAXIMUM | | OVERALL WIDTH | 0.938 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.650 INCHES | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND NICKEL | | SHELL TYPE | SOLID | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | DOUBLE STUB | | THREAD QUANTITY PER INCH | 10 | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
|
|