|
|
|
National Stock Number:
5935-01-258-0709
Federal Supply Class:
5935
National Item Identification Number:
012580709
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 352250017777 | H0203 | THALES NEDERLAND B.V. | | M85049/50-2 | 0U583 | SAE INTERNATIONAL | | SAE-AS85049/50 | 0U583 | SAE INTERNATIONAL | | M85049/50-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/50 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY WIDTH | 0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM | | CABLE OPENING DIAMETER | 0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM | | OVERALL HEIGHT | 0.688 INCHES MINIMUM AND 0.748 INCHES MAXIMUM | | OVERALL LENGTH | 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM | | OVERALL WIDTH | 0.689 INCHES MINIMUM AND 0.809 INCHES MAXIMUM | | MATERIAL | STEEL | | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE | | NOMINAL THREAD SIZE | 0.112 INCHES | | SIZE DESIGNATION | 2 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/50 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | HOOD, RIGHT ANGLE TYPE | | SURFACE TREATMENT | CADMIUM AND CHROMATE OR CHROMATE ZINC | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNC |
|
|