5935-01-258-5797, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-258-5796 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-258-5797

Federal Supply Class:
5935

National Item Identification Number:
012585797

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

DL60R105SN6116	11139	TE CONNECTIVITY CORPORATION
M83723/71A1005N	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-83723/71	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-83723/71	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.719 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT POSITION ARRANGEMENT STYLE	"10-5,10-05" SINGLE MATING END
CONTACT MATERIAL	IRON ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.719 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	FUNGUS RESISTANT AND CORROSION RESISTANT AND SALT WATER RESISTANT AND HUMIDITY RESISTANT
INCLUDED CONTACT QUANTITY	5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	0.0
INSERT MATERIAL	PLASTIC EPOXY AND RESIN SYNTHETIC SINGLE MATING END
OVERALL HEIGHT	0.937 INCHES NOMINAL
OVERALL LENGTH	1.300 INCHES MAXIMUM
OVERALL WIDTH	0.937 INCHES NOMINAL
MATING END QUANTITY	1
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	ANODIZE
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	81349-MIL-C-83723/71 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	FRONT SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-83723 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES NOMINAL

Click here to Register for Free 30-day Trial