|
|
|
National Stock Number:
5935-01-265-4501
Federal Supply Class:
5935
National Item Identification Number:
012654501
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MILC5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3101A20-7SW | 0U583 | SAE INTERNATIONAL | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL | | MS3101A20-7SW | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | 20-7 SINGLE MATING END | | INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END 1ST CONTACT GROUPING | | 4 SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL | | OVERALL LENGTH | 2.188 INCHES MAXIMUM | | OVERALL DIAMETER | 1.489 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | BACK SHELL AND | | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.188 INCHES AND | | 1.250 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.375 INCHES AND | | 0.625 INCHES | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 280.0 | | INSERT MATERIAL | RUBBER SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END 1ST CONTACT GROUPING | | 900.0 SINGLE MATING END 2ND CONTACT GROUPING | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END 1ST CONTACT GROUPING | | 1250.0 SINGLE MATING END 2ND CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND | | SILVER SINGLE MATING END ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT AND | | SALT WATER RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND | | CONTACT SURFACES SILVER |
|
|