|
|
|
National Stock Number:
5935-01-273-5313
Federal Supply Class:
5935
National Item Identification Number:
012735313
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| MIL-C-22992 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18062C28 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.750 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.859 INCHES MINIMUM AND 0.869 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.750 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | ENVIRONMENTAL PROTECTION | THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | NOMINAL THREAD SIZE | 2.000 INCHES | | OVERALL HEIGHT | 2.230 INCHES MINIMUM AND 2.271 INCHES MAXIMUM | | OVERALL LENGTH | 1.526 INCHES MINIMUM AND 1.557 INCHES MAXIMUM | | OVERALL WIDTH | 2.230 INCHES MINIMUM AND 2.271 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-26074 MIL SPEC 2ND TREATMENT RESPONSE AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM AND NICKEL | | SHELL TYPE | SOLID | | TEST DATA DOCUMENT | 81349-MIL-C-22992 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 10 | | THREAD SERIES DESIGNATOR | DOUBLE STUB | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 96906-MS18062 GOVERNMENT STANDARD |
|
|