5935-01-274-9108 ADAPTER,CONNECTOR Index 5935-01-274-9110 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-274-9109

Federal Supply Class:
5935

National Item Identification Number:
012749109

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
1057354-100779TE CONNECTIVITY CORPORATION
2225-000-K331-500795DELTA ELECTRONICS MANUFACTURING CORP
2225000K331-00500795DELTA ELECTRONICS MANUFACTURING CORP
2225000K381-00500795DELTA ELECTRONICS MANUFACTURING CORP
85038037Z3DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS)
3080-4010-0296341COBHAM ADVANCED ELECTRONIC SOLUTIONS INC.
8503812FP-100795DELTA ELECTRONICS MANUFACTURING CORP
901-901102660AMPHENOL CORP SPECTRA-STRIP/ITD
8503812FP-1037Z3DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS)
8503812FP-116236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
901-901174868AMPHENOL CORPORATION
SF1132-601795077SV MICROWAVE, INC.


Techincal Specification:
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.719 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.656 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.719 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS335.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLEN 2ND MATING END
CONTACT POSITION ARRANGEMENT STYLESMA 1ST MATING END
CONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING15000.0 MEGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONVIBRATION RESISTANT AND THERMAL SHOCK RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT
MATING END QUANTITY2
III PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
III PRECIOUS MATERIALGOLD
INCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 2ND MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
PROPRIETARY CHARACTERISTICSPACS
NOMINAL THREAD SIZE0.250 INCHES AND 0.625 INCHES
OVERALL HEIGHT1.010 INCHES MAXIMUM
OVERALL LENGTH1.254 INCHES MAXIMUM
OVERALL WIDTH1.010 INCHES MAXIMUM
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
SHELL MATERIALCOPPER ALLOY
SHELL TYPESOLID
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH36 AND 24
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNS AND UNEF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us