| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.995 INCHES NOMINAL |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CABLE ENTRANCE DIAMETER | 0.146 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.718 INCHES NOMINAL |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 10000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | SC SINGLE MATING END |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14550,CLASS 4 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-G-45204,GRADE C,TYP II,CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | COPPER AND GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.718 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND CORROSION RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| OVERALL HEIGHT | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| OVERALL LENGTH | 1.750 INCHES NOMINAL |
| OVERALL WIDTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.6875 INCHES AND 0.1380 INCHES |
| PRECIOUS MATERIAL AND LOCATION | BODY AND CABLE CLAMP SURFACES SILVER AND CONTACT SURFACE GOLD |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14550,CLASS 4 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-S-365 FED SPEC 2ND TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY 260 |
| SHELL SURFACE TREATMENT | COPPER AND SILVER |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | FURNISHED ITEMS - GASKET |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A AND 2B |
| THREAD SERIES DESIGNATOR | UNEF AND UNC |
| THREAD QUANTITY PER INCH | 24 AND 32 |
| THREADED DEVICE TYPE | MOUNTING BUSHING AND MOUNTING HOLE |