5935-01-279-2110, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-279-2109 CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-279-2111 CONNECTOR BODY,PLUG,ELECTRICAL

National Stock Number:
5935-01-279-2110

Federal Supply Class:
5935

National Item Identification Number:
012792110

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

M83503/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M83503/20-08	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-83503/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	RIGHT ANGLE TYPE
CONNECTOR LOCKING METHOD	LATCH
CONTACT POSITION ARRANGEMENT STYLE	2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	1.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	1.395 INCHES MINIMUM AND 1.405 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION PROOF
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	16 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-24519,TY GPT-15F OR TY GPT-20F OR TY GPT-30F MIL SPEC ALL MATERIAL RESPONSES SINGLE MATING END
INSERT MATERIAL	GLASS AND PLASTIC POLYESTER SINGLE MATING END
OVERALL HEIGHT	1.295 INCHES MINIMUM AND 1.300 INCHES MAXIMUM
OVERALL LENGTH	1.555 INCHES MINIMUM AND 1.565 INCHES MAXIMUM
OVERALL WIDTH	0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
MATING END QUANTITY	1
POLARIZATION METHOD	SHELL
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.016 GOLD GRAINS, TROY
SPECIFICATION/STANDARD DATA	81349-MIL-C-83503/20 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	PIN SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-83503 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.093 INCHES MINIMUM AND 0.105 INCHES MAXIMUM

Click here to Register for Free 30-day Trial