| BODY STYLE | STRAIGHT TYPE |
| CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END 1ST CONTACT GROUPING |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.100 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND SALT WATER RESISTANT AND HUMIDITY RESISTANT AND THERMAL SHOCK RESISTANT |
| INCLUDED CONTACT QUANTITY | 29 SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END 1ST CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,SDG-F MIL SPEC ALL MATERIAL RESPONSES SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE AND GLASS FIBER SINGLE MATING END |
| OVERALL HEIGHT | 0.475 INCHES NOMINAL |
| OVERALL LENGTH | 2.340 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| OVERALL WIDTH | 0.250 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.086 INCHES |
| POLARIZATION METHOD | JACKSCREW |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.029 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SPECIFICATION/STANDARD DATA | 90536-7915667-09 MANUFACTURERS SOURCE CONTROL |
| SPECIAL FEATURES | SOCKET CONTACT OBMITTED AT POSITION NO. 16 |
| TERMINAL LOCATION | BACK SINGLE MATING END 1ST CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END 1ST CONTACT GROUPING |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 56 |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |